Vehicle Interior

How To Proceed With Troubleshooting

~1min read

HINT:

  • Use the following procedures to troubleshoot the key reminder warning system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

NEXT
  1. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Result

Proceed to

CAN DTC is not output

A

CAN DTC is output

B

B

GO TO CAN COMMUNICATION

A
  1. PROBLEM SYMPTOMS TABLE

Result

Proceed to

Fault is not listed in problem symptoms table

A

Fault is listed in problem symptoms table

B

B

GO TO STEP 6

A
  1. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) Terminals of ECU

Click here

(c) DATA LIST/ACTIVE TEST

Click here

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END