The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock system is operating normally. Check the power door lock system first before troubleshooting the wireless door lock control system.
Click here
Use these procedures to troubleshoot the wireless door lock control system.
*: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
NEXT
INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT
INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Using the GTS, check for CAN communication system DTCs.
Click here
Result
Proceed to
CAN DTCs are not output
A
CAN DTCs are output
B
B
GO TO CAN COMMUNICATION SYSTEM
A
PROBLEM SYMPTOMS TABLE
Result
Proceed to
Fault is not listed in problem symptoms table
A
Fault is listed in problem symptoms table
B
B
ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE