The wireless door lock control system functions to lock and unlock all the doors from a distance. The system is controlled by a handheld transmitter which sends radio waves to the door control receiver. The main body ECU (multiplex network body ECU) performs an ID code identification process and engages the door lock control.
2. FUNCTION OF MAIN COMPONENTS
Component
Function
Door control transmitter assembly
Has LOCK, UNLOCK and PANIC switch.
Transmits weak radio waves (recognition codes and function codes) to the door control receiver.
Illuminates the indicator light (LED) during transmission.
Door control receiver
Receives weak radio waves (recognition codes and function codes) and outputs them as code data to the main body ECU (multiplex network body ECU).
Front courtesy light switch
Rear courtesy light switch
Turns on when a door is opened and turns off when it is closed. Outputs door status codes (open or closed) to the main body ECU (multiplex network body ECU).
Unlock warning switch assembly
Detects if the key is inserted in the ignition key cylinder or not.
Door lock position switch
Transmits the door lock positions of each door to the main body ECU (multiplex network body ECU).
Main body ECU (multiplex network body ECU)
Sends wireless door lock control signals in response to the code data from the door control receiver and receives signals from each switch.
3. SYSTEM FUNCTION
The door control transmitter assembly has the LOCK, UNLOCK and PANIC switches. Operating these switches activates each function.
The wireless door lock control system has the following functions:
HINT:
Part of these functions can be customized.
Click here
Function
Operation
All door lock
Pressing the LOCK switch locks all doors.
All door unlock
(2-step unlock)
Pressing the UNLOCK switch twice within 3 seconds unlocks all the doors after the driver's door is unlocked.
Automatic lock
If none of the doors is opened within 60 seconds after they are unlocked by the wireless door lock control, all the doors will lock again automatically.
Panic alarm
Pressing the PANIC switch of the transmitter for longer than about 0.8 seconds causes the following alarms to activate:
Sounds the horn and security horn.
Flashes the hazard lights, headlights, and taillights.
Illuminates the front interior light (when the switch is in the DOOR position).
While the panic alarm is operating, pressing any switch of the transmitter cancels the alarm operation.
Answer back
When the doors are locked by wireless operation, the hazard warning lights flash once, and wireless door lock buzzer sounds once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice and wireless door lock buzzer sounds twice.
Door ajar warning*
The buzzer sounds when the LOCK switch is pressed when any of the doors are ajar, and it sounds for 5 seconds continuously. The buzzer stops when all doors are closed or the UNLOCK switch is pressed.
Wireless lock function with doors open
Pressing the lock switch of the door control transmitter assembly while the door is open causes the door to lock when it is closed.
Illuminated entry
When all the doors are locked, pressing UNLOCK causes the interior lights to come on simultaneously with the unlock operation.
Self-diagnostic mode
If the door control receiver receives normal radio waves from the door control transmitter assembly when the system is in diagnostic mode, it flashes the interior light in a normal pattern.
HINT:
*: When wireless lock with doors open function is set to "ON", this function is canceled even if set to "ON".