Engine, Hybrid System
Inspection
INSPECTION
PROCEDURE
1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
- 2 (RB) - 6 (PL)
- 4 (B) - 5 (L)
|
Shift lever in P |
Below 1 Ω |
2 (RB) - 1 (RL) |
Shift lever in R |
Below 1 Ω |
- 2 (RB) - 9 (NL)
- 4 (B) - 5 (L)
|
Shift lever in N |
Below 1 Ω |
2 (RB) - 7 (DL) |
Shift lever in D, S, "+" or "-" |
Below 1 Ω |
- 2 (RB) - 6 (PL)
- 4 (B) - 5 (L)
|
Shift lever not in P |
10 kΩ or higher |
2 (RB) - 1 (RL) |
Shift lever not in R |
10 kΩ or higher |
- 2 (RB) - 9 (NL)
- 4 (B) - 5 (L)
|
Shift lever not in N |
10 kΩ or higher |
2 (RB) - 7 (DL) |
Shift lever not in D, S, "+" or "-" |
10 kΩ or higher |
If the result is not as specified, replace the park/neutral position switch assembly. |
Was this page helpful?