Engine, Hybrid System

Removal

~1min read

REMOVAL

PROCEDURE

1. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Remove the nut and disconnect the cable.

2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Disconnect the switch connector.

(b) Remove the nut, spring washer and transmission control shaft lever RH.

(c) Using a screwdriver, bend the tabs of the lock washer.

(d) Remove the lock nut and lock washer.

(e) Remove the bolt and switch.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.