Audio, Visual, Telematics
Inspection
In this manual: Audio, Visual, Telematics
~1min read
INSPECTION
PROCEDURE
1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
(a) When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.
OK:
Malfunction disappears.
HINT:
- Connect the connectors to the front No. 2 speaker assemblies.
- When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.
- Perform the inspection above on both the LH and RH sides.
2. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY (for 7 Speakers)
(a) Temporarily replace the front No. 4 speaker assembly with a new or normally functioning one.
OK:
Malfunction disappears.
HINT:
Connect the connectors to the front No. 4 speaker assembly.
Was this page helpful?