Engine, Hybrid System
Installation
In this manual: Engine, Hybrid System
~1min read
INSTALLATIONPROCEDURE1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(a) Install the spring and check ball body.
(d) Install the detent spring and detent spring cover with the bolt. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} 2. CONNECT TRANSMISSION WIRE 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY 5. ADD AUTOMATIC TRANSMISSION FLUID (a) Add automatic transmission fluid (See page |
Was this page helpful?


