Vehicle Interior

Installation

~1min read

INSTALLATION

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.
  • A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL HEADLIGHT ASSEMBLY LH

(a) Put protective tape around the headlight assembly LH.

Text in Illustration

*1

Protective Tape

(b) Connect each connector and attach the clamp.

(c) Attach the claw to install the headlight assembly LH.

(d) Install the 2 screws and bolt.

2. INSTALL FRONT END PANEL LH

3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

4. ADJUST HEADLIGHT AIMING

(See page )