Installation
INSTALLATION
PROCEDURE
1. INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)

2. INSTALL NO. 2 RADIO RECEIVER BRACKET
(a) w/o Satellite Radio:
Install the No. 2 radio receiver bracket with the 3 bolts.
Torque:
3,5 N·m {36 kgf·cm, 31 in·lbf}
(b) w/ Satellite Radio:
Install the No. 2 radio receiver bracket with the 5 bolts.
Torque:
3,5 N·m {36 kgf·cm, 31 in·lbf}
3. INSTALL NO. 1 RADIO RECEIVER BRACKET
(a) w/o Satellite Radio:
Install the No. 1 radio receiver bracket with the 3 bolts.
Torque:
3,5 N·m {36 kgf·cm, 31 in·lbf}
(b) w/ Satellite Radio:
Install the No. 1 radio receiver bracket with the 5 bolts.
Torque:
3,5 N·m {36 kgf·cm, 31 in·lbf}
4. INSTALL NO. 1 NAVIGATION WIRE (w/ Satellite Radio)

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
(a) Connect each connector.
(b) Insert the radio and display receiver assembly with bracket and attach the 2 guides and 3 clips on its backside.
NOTICE:
When inserting the radio receiver, do not press its knobs.
(c) Install the radio and display receiver assembly with bracket with the 4 bolts.
Torque:
5,5 N·m {56 kgf·cm, 49 in·lbf}
6. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

7. INSTALL CENTER LOWER INSTRUMENT COVER

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).