When a new millimeter wave radar sensor assembly is installed, it receives vehicle specification information from the main body ECU (multiplex network body ECU) and stores the information.
DTC C1A02 is stored when the millimeter wave radar sensor assembly receives the vehicle specification information from the main body ECU (multiplex network body ECU) but cannot store it.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C1A02
Vehicle Information Not Obtained
When the vehicle is being driven at a speed of 50 km/h or more, the millimeter wave radar sensor assembly does not have stored vehicle information for 1 second or more.
Millimeter wave radar sensor assembly
NOTICE:
When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle. As a result, a DTC may be stored.
If the millimeter wave radar sensor assembly has been replaced, be sure to perform millimeter wave radar sensor assembly adjustment.
Click here
PROCEDURE
CHECK FOR DTCs (PRE-COLLISION SYSTEM)
(a) Clear the DTCs.
Click here
(b) Make sure that the DTC detection conditions are met.
HINT:
If the detection conditions are not met, the system cannot detect the malfunction.