Park Assist / Monitoring
Clearance Warning Buzzer
In this manual: Park Assist / Monitoring
~1min read
Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
Removal REMOVAL PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH
.gif)
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
.gif)
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
.gif)
4. REMOVE NO. 1 CLEARANCE WARNING BUZZER
(a) Disconnect the connector. |
![]() |
(b) Disengage the clamp and remove the No. 1 clearance warning buzzer.
Installation INSTALLATION PROCEDURE1. INSTALL NO. 1 CLEARANCE WARNING BUZZER
(a) Engage the clamp to install the No. 1 clearance warning buzzer.
(b) Connect the connector.
2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
.gif)
3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
.gif)
4. INSTALL FRONT DOOR SCUFF PLATE LH
.gif)
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
