Toyota Venza Quiz
Theft Deterrent / Keyless Entry

Electrical Key Oscillator(for Rear Side)

In this manual: Theft Deterrent / Keyless Entry
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE

1. REMOVE REAR BUMPER PLATE LH


2. REMOVE REAR BUMPER PLATE RH


3. REMOVE REAR BUMPER ASSEMBLY


4. REMOVE ELECTRICAL KEY ANTENNA

(a) Disconnect the connector.

(b) Remove the 2 nuts and the electrical key antenna.

NOTICE:

Be careful when removing the electrical key antenna. If the antenna is dropped, replace it with a new one.

Installation INSTALLATION PROCEDURE

1. INSTALL ELECTRICAL KEY ANTENNA

(a) Install the electrical key antenna with the 2 nuts.

NOTICE:

Be careful when installing the electrical key antenna. If the antenna is dropped, replace it with a new one.

(b) Connect the connector.

2. INSTALL REAR BUMPER ASSEMBLY


3. INSTALL REAR BUMPER PLATE LH


4. INSTALL REAR BUMPER PLATE RH

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.