Engine Hood Courtesy Switch

1. INSPECT SECURITY COURTESY SWITCH (HOOD LOCK ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 Locked 10 kΩ or higher 1 - 2 Opened Below 1 Ω Text in Illustration *1 Component without harness connected (Security Courtesy Switch (Hood Lock Assembly)) *2 Opened *3 Locked If the result is not as specified, replace the security courtesy switch (hood lock assembly).

1. REMOVE COOL AIR INTAKE DUCT SEAL

2. REMOVE RADIATOR GRILLE

3. REMOVE HIGH PITCHED HORN ASSEMBLY

4. REMOVE SECURITY COURTESY SWITCH (HOOD LOCK ASSEMBLY)

1. INSTALL SECURITY COURTESY SWITCH (HOOD LOCK ASSEMBLY)

2. INSTALL HIGH PITCHED HORN ASSEMBLY

3. INSTALL RADIATOR GRILLE

4. INSTALL COOL AIR INTAKE DUCT SEAL

5. INSPECT HOOD SUB-ASSEMBLY

6. ADJUST HOOD SUB-ASSEMBLY