Toyota Venza: Ignition Coil And Spark Plug

Components COMPONENTS ILLUSTRATION

Removal REMOVAL PROCEDURE

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

2. REMOVE IGNITION COIL ASSEMBLY

(a) Disconnect the 4 ignition coil assembly connectors.

(b) Remove the 4 bolts and 4 ignition coil assemblies.

3. REMOVE SPARK PLUG

(a) Using a spark plug wrench, remove the 4 spark plugs.

Installation INSTALLATION PROCEDURE

1. INSTALL SPARK PLUG

(a) Using a spark plug wrench, install the 4 spark plugs.

Torque:

25 N·m {254 kgf·cm, 18 ft·lbf}

HINT:

Perform "Inspection After Repair" after replacing the spark plugs (See page ).

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 4 ignition coil assemblies with the 4 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

HINT:

Perform "Inspection After Repair" after replacing an ignition coil assembly (See page ).

(b) Connect the 4 ignition coil assembly connectors.

3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Ignition Coil And Spark Plug