Toyota Venza Quiz
Wiper / Washer

Installation

In this manual: Wiper / Washer
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
INSTALLATION PROCEDURE

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

(b) Connect the 2 connectors.

2. INSTALL UPPER STEERING COLUMN COVER

(a) Engage the 3 claws and 4 clips to install the upper steering column cover to the lower instrument cover.

3. INSTALL LOWER STEERING COLUMN COVER

(a) Engage the 3 claws to install the lower steering column cover to the upper steering column cover.

(b) Turn the steering wheel assembly to the left and install the screw shown in the illustration.

(c) Turn the steering wheel assembly to the right and install the screw shown in the illustration.

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


6. INSTALL FRONT DOOR SCUFF PLATE LH

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.