Installation

1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Using a tacker, install the separate type front seat cushion heater to the end of the separate type front seat cushion cover with 25 new tack pins. NOTICE: Be careful not to damage the cushion.

(b) Using hog ring pliers, temporarily install the separate type front seat cover with 18 new hog rings. Text in Illustration *1 Hog Ring Pliers NOTICE: Be careful not to damage the separate type front seat cover. Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cover.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

3. INSTALL POWER SEAT SWITCH

4. INSTALL FRONT INNER SEAT CUSHION SHIELD

5. INSTALL FRONT SEAT INNER BELT ASSEMBLY

6. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY

7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

8. INSTALL RECLINING POWER SEAT SWITCH KNOB

9. INSTALL FRONT SEAT ASSEMBLY

10. INSTALL FRONT SEAT REAR INNER TRACK COVER

11. INSTALL FRONT SEAT REAR OUTER TRACK COVER

12. INSTALL FRONT SEAT HEADREST ASSEMBLY

13. INSPECT FRONT SEAT ASSEMBLY

14. INSPECT SRS WARNING LIGHT

(See page )