Seat

Removal

~1min read
REMOVAL PROCEDURE

1. REMOVE FRONT SEAT HEADREST ASSEMBLY

2. REMOVE FRONT SEAT REAR OUTER TRACK COVER


3. REMOVE FRONT SEAT REAR INNER TRACK COVER


4. REMOVE FRONT SEAT ASSEMBLY


5. REMOVE RECLINING POWER SEAT SWITCH KNOB


6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


7. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


8. REMOVE FRONT SEAT INNER BELT ASSEMBLY


9. REMOVE FRONT INNER SEAT CUSHION SHIELD


10. REMOVE POWER SEAT SWITCH


11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Remove the 18 hog rings and the separate type front seat cushion cover.


(b) Cut off the 25 tack pins that fasten the seat heater, and then remove the separate type front seat cushion heater assembly from the separate type front seat cushion cover.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.