Installation

1. INSTALL STEREO COMPONENT TUNER ASSEMBLY

2. INSTALL NAVIGATION WIRE

(a) Connect the 3 connectors to install the navigation wire.

3. INSTALL STEREO COMPONENT TUNER ASSEMBLY WITH WIRE

(a) Install the stereo component tuner assembly with wire with the 4 screws.

(b) Connect the 3 connectors.

4. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (w/o Navigation System)

5. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (w/ Navigation System)

6. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

7. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

8. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

9. INSTALL CONSOLE BOX SUB-ASSEMBLY

10. INSTALL POSITION INDICATOR HOUSING ASSEMBLY

11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

12. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

13. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

14. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

15. INSTALL FRONT DOOR SCUFF PLATE RH

16. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

17. INSTALL CONSOLE BOX ASSEMBLY

18. INSTALL NO. 2 CONSOLE BOX CARPET

19. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)

20. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)

21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).