Removal

1. PRECAUTION (w/ Navigation System)

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (See page ).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)

5. REMOVE NO. 2 CONSOLE BOX CARPET

6. REMOVE CONSOLE BOX ASSEMBLY

7. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

8. REMOVE FRONT DOOR SCUFF PLATE RH

9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

10. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

11. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

12. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

13. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

14. REMOVE CONSOLE BOX SUB-ASSEMBLY

15. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

16. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

17. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

18. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (w/o Navigation System)

19. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (w/ Navigation System)

20. REMOVE STEREO COMPONENT TUNER ASSEMBLY WITH WIRE

(a) Disconnect the 3 connectors.

(b) Remove the 2 screws.

(c) Remove the 2 screws and stereo component tuner assembly with wire.

21. REMOVE NAVIGATION WIRE

(a) Disconnect the 3 connectors to remove the navigation wire.

22. REMOVE STEREO COMPONENT TUNER ASSEMBLY