Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)

4. REMOVE NO. 2 CONSOLE BOX CARPET

5. REMOVE CONSOLE BOX ASSEMBLY

6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

7. REMOVE FRONT DOOR SCUFF PLATE LH

8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

10. REMOVE FRONT DOOR SCUFF PLATE RH

11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

15. REMOVE CONSOLE BOX SUB-ASSEMBLY

16. REMOVE LOWER STEERING COLUMN COVER

17. REMOVE UPPER STEERING COLUMN COVER

18. REMOVE INSTRUMENT CLUSTER FINISH PANEL

19. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

(a) Disengage the 4 claws.

(b) Disconnect the connector and remove the lower instrument panel finish panel assembly.

20. REMOVE ENGINE SWITCH

(a) Detach the 2 claws and remove the engine switch.