Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE RADIATOR ASSEMBLY

HINT:

See page

3. REMOVE V-RIBBED BELT

HINT:

See page

4. REMOVE GENERATOR ASSEMBLY

(a) Remove the terminal cap.

(b) Remove the nut and disconnect the wire harness from terminal B.

(c) Disconnect the generator connector from the generator assembly.

(d) Disconnect the connector from the compressor and magnetic clutch.

(e) Disconnect the 2 wire harness clamps.

(f) Remove the 2 bolts.

(g) Remove the bolt and generator assembly.

(h) Disconnect the wire harness clamp and remove the bolt and generator bracket.

(i) Remove the bolt and wire harness clamp.