Removal

REMOVAL PROCEDURE

1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

(See page )

2. REMOVE NO. 1 ANTENNA CORD SUB-ASSEMBLY

(a) Disengage the 7 clamps and remove the No. 1 antenna cord sub-assembly.

3. REMOVE ROOF HEADLINING ASSEMBLY

(See page )

4. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof)

(a) Peel up the strips of tape so that the washer hose and No. 2 antenna cord sub-assembly can be removed.

Text in Illustration

	Tape	-	-
	Front	-	-

HINT:

Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

(b) Remove the washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly.

5. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof)

(a) Peel up the strips of tape so that the washer hose and No. 2 antenna cord sub-assembly can be removed.

Text in Illustration

	Tape	-	-
	Front	-	-

HINT:

Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

(b) Remove the washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly.

6. REMOVE UPPER BACK WINDOW PANEL TRIM

7. REMOVE BACK DOOR PANEL TRIM ASSEMBLY

8. REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door)

9. REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door)

10. REMOVE BACK DOOR TRIM COVER RH

11. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY

(a) w/o Satellite Radio:

(1) Disconnect the 2 connectors.

(2) Disengage the 4 hooks and disconnect the washer hose.

(3) Disengage the 7 clamps.

Text in Illustration

*1	Clamp	*2	Hook
*3	Washer Hose	-	-

(b) w/ Satellite Radio:

(1) Disconnect the connector.

(2) Disengage the 4 hooks and disconnect the washer hose.

(3) Disengage the 5 clamps.

Text in Illustration

*1	Clamp	*2	Hook
*3	Washer Hose	-	-

(c) Disconnect the connector and disengage the clamp.

(d) Disengage the 4 clamps.

Text in Illustration

*1

Clamp

*2

Grommet

(e) Disconnect the grommet from the back door.

(f) Disengage the 2 claws.

(g) Remove the No. 3 antenna cord sub-assembly with the washer hose as shown in the illustration.