Road Test

ROAD TEST

1. PROBLEM SYMPTOM CONFIRMATION

(a) Inspect the SET function.

Text in Illustration

*1	ON/OFF
*2	- SET

(1) Turn the cruise control main switch on.

(2) Drive at the required speed of between 40 km/h and 200 km/h.

(3) Push the cruise control main switch to - SET.

(4) Check that the SET indicator light illuminates at this time.

(5) After releasing the switch, check that the vehicle cruises at the set speed.

(b) Inspect the + function.

Text in Illustration

*1	ON/OFF
*2	- SET
*3	+ RES

(1) Turn the cruise control main switch on.

(2) Drive at the required speed of between 40 km/h and 200 km/h.

(3) Push the cruise control main switch to - SET.

(4) Check that vehicle speed increases while the cruise control main switch is pushed to + RES, and that the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control main switch to + RES and then release it immediately. Check that vehicle speed increases by approximately 1,6 km/h (tap-up control).

(c) Inspect the - function.

Text in Illustration

*1	ON/OFF
*2	- SET

(1) Turn the cruise control main switch on.

(2) Drive at the required speed of between 40 km/h and 200 km/h.

(3) Push the cruise control main switch to - SET.

(4) Check that vehicle speed decreases while the cruise control main switch is pushed to - SET, and the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control main switch to - SET, and then release it immediately. Check that vehicle speed decreases by approximately 1,6 km/h (tap-down control).

(d) Inspect the CANCEL function.

Text in Illustration

*1	ON/OFF
*2	- SET
*3	CANCEL

(1) Turn the cruise control main switch on.

(2) Drive at the required speed of between 40 km/h and 200 km/h.

(3) Push the cruise control main switch to - SET.

(4) When performing any one of the following, check that the cruise control system is canceled and that the normal driving mode returns.

• Depressing the brake pedal
• Moving the shift lever from D to N or 3rd, 2nd, or 1st range is selected with the shift lever in S
• Pulling the cruise control main switch to CANCEL
• Turning the cruise control main switch off

(e) Inspect the RES function.

Text in Illustration

*1	ON/OFF
*2	- SET
*3	+ RES

(1) Turn the cruise control main switch on.

(2) Drive at the required speed of between 40 km/h and 200 km/h.

(3) Push the cruise control main switch to - SET.

(4) Cancel cruise control operation by performing any of the above operations (other than turning the main switch off).

(5) After pushing the cruise control main switch to + RES at a speed of more than 40 km/h, check that the vehicle resumes the speed set prior to the cancellation.