Transmitter Battery(w/ Smart Key System)

(a) Push the release hook knob and extract the mechanical key.

(b) Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

HINT:

Tape the screwdriver tip before use.

(c) Insert a precision screwdriver into the gap and gently remove the battery (lithium battery: CR1632).

NOTICE:

• Do not push the terminals with your finger.
• Do not forcibly pry up the battery. The terminals may be damaged.
• Do not touch the battery with wet hands. Water may cause rust.
• Do not touch or move any components inside the transmitter. It may interfere with proper operation.

HINT:

Tape the screwdriver tip before use.

(a) Install a new battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.

NOTICE:

• Do not bend the transmitter battery electrode during insertion.
• Keep the transmitter cover interior free of dust and oil.

(b) Install the transmitter housing cover by pressing down on it as shown in the illustration.

(c) Insert the mechanical key into the transmitter.