4- cylinder injection engine(1.4 1 direct inction. turbocharger)
Assembly overview - assembly mountings
In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
~1min read
| 1 - | Bolt |
Renew
Tightening sequence → Fig.
| 2 - | Engine support |
Specified torque and tightening sequence → Fig.
| 3 - | Engine mounting |
With support arm.
Removing and installing → Chapter
| 4 - | Bolt |
Renew
40 N·m + 90°
| 5 - | Bolt |
Renew
20 N·m + 90°
| 6 - | Bolt |
8 N·m
| 7 - | Bracket |
| 8 - | Bolt |
Renew
60 N·m + 90°
| 9 - | Pendulum support |
Removing and installing → Chapter
| 10 - | Bolt |
Renew
Specified torque and tightening sequence → Fig.
| 11 - | Bolt |
Renew
Specified torque and tightening sequence → Fig.
| 12 - | Bolts |
Renew
Specified torque and tightening sequence → Fig.
| 13 - | Bolt |
Renew
60 N·m + 90°
| 14 - | Bolt |
Renew
60 N·m + 90°
| 15 - | Bolt |
Renew
50 N·m + 90°
| 16 - | Gearbox mounting |
With support arm.
Removing and installing → Chapter
Engine support - specified torque and installation sequence Note
Renew bolts that are tightened with specified tightening angle.
|
 |
| Stage | Bolts | Specified torque/ additional specified angle |
| 1 | -1 … 3- | 7 N·m |
| 2 | -1 … 3- | 40 N·m |
| 3 | -1 … 3- | Turn 90° further |
Install pendulum support Note
Renew bolts tightened through an additional specified angle.
|
 |
| Stage | Bolts | Specified torque/ additional specified angle |
| 1 | -2, 3- | 50 N·m |
| 2 | -1- | 130 N·m |
| 3 | -1 … 3- | Turn 90° further |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?