Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Checking adjustment of assembly mountings (engine and gearbox mountings)

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Procedure

The following specifications must be obtained:

There must be a distance of -a- = 10 mm between engine support -2- and engine mounting -1-. Side surface of engine support casting -2- must be located parallel to support arm of engine mounting -1-.

Distance -b- = distance -b-.

Note Distance -a- = 10 mm can be checked with a metal rod of suitable size, or similar.
  • If the dimension is too small or too high, adjust assembly mountings → Chapter.
Checking adjustment of assembly mountings (engine and gearbox mountings)

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.