Electrical system

Assembly overview - steering column switch module, with electronic ignition lock

~1min read
010203040501.11N·mlb·ft
Tightening torque found on this page
Assembly overview - steering column switch module, with electronic ignition lock
1 - Starter button -E378-

Overview of fitting locations → Chapter

2 - Steering column electronics control unit -J527-

With airbag coil connector and return ring with slip ring -F138-

Removing and installing → Chapter

Caution

Risk of damage to the return ring.

When removed, the return ring with slip ring must not be turned.

3 - Bolt

Qty. 3

Specified torque: 1,1 N·m

4 - Mounting

With turn signal switch -E2-, intermittent wiper switch -E22-

Vehicles with cruise control system: with cruise control system switch -E45-.

Removing and installing → Chapter

5 - Control unit for electronic steering column lock -J764-

Removing and installing → Running gear, axles, steering; Rep. gr.48.

6 - Bolt

Specified torque: 1,1 N·m

7 - Steering column
8 - Bolt

Qty. 2

For steering lock housing (shear bolt)

9 - Immobiliser reader coil -D2-

Removing and installing → Chapter

10 - Ignition key

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.