Electrical system

Assembly overview - steering column switch module, with mechanical ignition lock

~1min read
010203040501.11N·mlb·ft
Tightening torque found on this page
Assembly overview - steering column switch module, with mechanical ignition lock
1 - Ignition key
2 - Lock cylinder

Removing and installing → Chapter

3 - Immobiliser reader coil -D2-

Removing and installing → Chapter

4 - Mounting

With turn signal switch -E2-, intermittent wiper switch -E22-

Vehicles with cruise control system: with cruise control system switch -E45-.

Removing and installing → Chapter

5 - Steering column electronics control unit -J527-

With airbag coil connector and return ring with slip ring -F138-

Removing and installing → Chapter

Caution

Risk of damage to the return ring.

When removed, the return ring with slip ring must not be turned.

6 - Bolt

Qty. 3

Specified torque: 1,1 N·m

7 - Ignition/starter switch -D-

Removing and installing → Chapter

8 - Steering lock housing

Removing and installing → Chapter

9 - Bolt

Specified torque: 1,1 N·m

10 - Ignition key withdrawal lock solenoid -N376-

Versions with dual clutch gearbox

Removing and installing → Chapter

11 - Steering column
12 - Bolt

Qty. 2

For steering lock housing (shear bolt)

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.