Volkswagen Golf Quiz
Brake system (hybrid)

Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles

In this manual: Brake system (hybrid)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
0102030405086N·mlb·ft
Tightening torque found on this page
Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles
1 - Brake system pressure accumulator -VX70-

Removing and installing → Chapter

2 - Bracket

Check for secure seating after installing

3 - Bolt

8 N·m

4 - Electrical connector
5 - Rubber damper

Do not press rubber dampers out of bracket when installing bracket.

6 - Bracket
7 - Hexagon nut

20 N·m

8 - Brake line

To brake master cylinder

With thread M10 x 1

14 N·m

9 - Bolt

8 N·m

10 - Dust cap

Fit onto bleeder valve

11 - Bleeder valve

Before screwing in, apply thin coat of assembly paste -G 052 150 A2- to thread.

8 N·m

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.