Brake system (hybrid)
Brake test
In this manual: Brake system (hybrid)
~1min read
General informationThe drive is provided by the test rig.For the test, ensure for vehicles with a manual gearbox that the gear lever is in neutral, and for vehicles with an automatic gearbox that the selector lever is in »N«. When conducting the test, observe the specifications provided by the manufacturer of the test rig. Note
The brake regulation systems do not function when ignition is off. |
Checking vehicles with front-wheel driveThe brake test must be carried out on a single-axle roller dynamometer.The maximum test speed must not exceed 6 km/h.The test rigs authorised by Volkswagen fulfil these requirements. |
Checking electromechanical parking brake, vehicles with front-wheel driveActivate »TЬV mode«:Seat belt is fittedRear axle on single-axle roller dynamometerIgnition remains switched onAuto-hold is switched offFront wheels must be stationaryRear wheels must rotate for at least 5 seconds at a constant speed between 2.5 and 9 km/h. When entering »TЬV mode«, the yellow electric parking brake and handbrake fault warning lamp -K214- will light up. Note In »TЬV mode«, the electromechanical parking brake does not close fully when the button is first pressed. The tension is increased gradually by actuating the electromechanical parking brake button -E538- 4 times in succession. Actuating the electromechanical parking brake button -E538- a fifth time releases the electromechanical parking brake. End »TЬV mode«:Front wheels, speed over 0 km/hRear wheels, speed lower than 2,5 km/h or over 9 km/hIgnition off. |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
Note