Brake system
Instructions for checking
In this manual: Brake system
~1min read
The following instructions are intended to help you find the causes of problems effectively and objectively in the event of complaints about the brake servo or in the event of a so-called »hard brake pedal«. This check relates to the following components:Brake servoOil seal between brake master cylinder and brake servo.Non-return valveVacuum hoses with connectorsVacuum pump (if fitted)When evaluating the measuring results, bear in mind that they will be influenced by the geographical location. The higher your location is above sea level, the lower the air pressure will be. Before checking the vacuum system, please take note of the following prerequisites for checking: Visual inspection of all vacuum hoses for damage (e.g. cracks or marten bite) and to check that they are correctly and firmly attachedEnsure cleanliness when working on vacuum systemBefore starting work, clean engine compartment if necessary |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?