Measurement location

Note

The vehicle shown in the illustration may differ from the actual vehicle.

1 -	Volkswagen logo

Laser pointer aligned to centre of Volkswagen logo

2 -	Wheel centre mounting -VAS 6350/1-

With wheel bolt adapter (AF 17) and measuring paddle

3 -	Stop bracket

to support spacing laser -VAS 6350/2- for distance measurement

Distance from wheel centre mountings -VAS 6350/1- on rear wheels: Dimension -a - = 1700 ± 2 mm.

4 -	Spirit level

on calibration unit -VAS 6350-

to check horizontal position of calibration unit -VAS 6350-

5 -	Spacing laser -VAS 6350/2-

for distance measurement

Handling → Operating instructions

6 -	Plastic foot

Qty. 3

Adjustable to change horizontal position of calibration unit -VAS 6350-

7 -	Linear laser -VAS 6350/3-

with “laser goggles”

on calibration unit -VAS 6350-

Switching on and off → Operating instructions

8 -	Measuring scale

to position calibration unit for lane change assist -VAS 6350/4-

Dimension to be set, measuring point on steel rule = 621 mm

9 -	Calibration unit for lane change assist -VAS 6350/4-

is changed over from the left to the right-hand side of the measuring field during calibration If assembled correctly, the mains power lead should be fitted to the bottom left of the calibration unit (as seen facing direction of normal travel)

Height of upper edge of calibration unit to hall floor: approx. 606 mm