Removing and installing electronics box (E-box)

Removing

• With ignition switched off, disconnect earth cable from battery → Chapter.

Diesel engine

• Remove engine control unit and lay to one side with connectors attached → Rep. gr.23.

Petrol engine

• Remove engine control unit and lay to one side with connectors attached → Rep. gr.24.

Continuation for all vehicles

• Press release buttons -arrows-.
• Remove cover -1- for electronics box in engine compartment.

• Release retaining tab -2- using a screwdriver and pull off front cover -1- upwards -arrow-.

• Cut through cable tie (bottom) on wiring harness.
• Release fasteners -1, 2 and 4--arrow-, remove fuse holder B -3- and lay to one side.

• Unscrew nuts -arrows- and remove bracket for engine control unit -1-.
• Release retaining tab -3- and disengage engine compartment electronics box -2- from studs.
• Lift out engine compartment electronics box.

Installing

Install in the reverse order of removal, observing the following:

Specified torques

• Connect battery → Chapter.