Electrical system

Removing and installing relay and fuse carrier behind dash panel, RHD vehicles

~1min read

Removing

  • With ignition switched off, disconnect earth cable from battery → Chapter.
  • Remove dash panel → General body repairs, interior; Rep. gr.70.
Removing and installing relay and fuse carrier behind dash panel, RHD vehicles
Note The exact assignment should be gleaned from the latest current flow diagram → Current flow diagrams, Electrical fault finding and Fitting locations.

Take photographs of the assignment, if necessary.

  • Press locking mechanism -5- on both sides and pull it in direction of arrow -C-.
  • Pull off connector -4- in direction of arrow -C-.
  • Release retaining tab -1- in direction of arrow -A-.
  • Release retaining tab -2- in direction of arrow -B-.
  • Release retaining tab -3- in direction of arrow -C-.
  • Pull fuse holder C -SC- towards rear -arrow D- out of bracket.
  • Disconnect electrical wiring.

Installing

Installation is carried out in the reverse sequence.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.