Fuel supply system - Petrol engines

Removing and installing fuel gauge sender -G-, vehicles with four-wheel drive

~1min read

Removing

  • Remove fuel delivery unit → Chapter.
  • Disconnect connector -4- from right flange.
  • Disengage and move clear electrical wiring at retainer -arrow-.
  • Release locking lugs -1 and 2- from tabs.
  • Pull out fuel gauge sender -G--3- upwards.

Installing

Installation is carried out in the reverse order; note the following:

  • Insert fuel gauge sender -G- into guides on fuel delivery unit and press down until it engages.
  • Route and attach electric cables on fuel delivery unit.
  • Install fuel delivery unit → Chapter.
Removing and installing fuel gauge sender -G-, vehicles with four-wheel drive

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.