Volkswagen Golf Quiz
Fuel supply system - Petrol engines

Removing and installing tank pressure sensor -G400

In this manual: Fuel supply system - Petrol engines
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

Note The tank pressure sensor -G400- is located in the pressure regulating valve on the activated charcoal filter → Chapter.
  • Remove activated charcoal filter → Chapter.
  • Remove hose -1- from activated charcoal filter -2-.
  • To do this, loosen clamps -arrows-.
Removing and installing tank pressure sensor -G400
  • Unscrew bolts -arrows- for pressure regulating valve -1- on activated charcoal filter -2-.
Removing and installing tank pressure sensor -G400
  • Pull pressure regulating valve -1- in -direction of arrow- out of seal -3- on activated charcoal filter -2-.

Installing
Removing and installing tank pressure sensor -G400

Install in reverse order. In the process, note the following:

  • Make sure that seal -3- is properly seated.

Specified torque

→ Chapter „Assembly overview - activated charcoal filter system“
Removing and installing tank pressure sensor -G400

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.