Volkswagen Golf Quiz
Fuel supply system - Petrol engines

Removing and installing fuel gauge sender -G-, vehicles with front-wheel drive

In this manual: Fuel supply system - Petrol engines
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

  • Remove fuel delivery unit → Chapter.
  • Note colour assignment of cables -1- for re-installation.
  • Release and pull off connectors -1- on sealing flange.
  • Disengage and move clear electrical wiring at retainer -arrow-.
  • Release locking lugs -3- and -4- from tabs.
  • Pull out fuel gauge sender -G--2- upwards.
  • Bend back the locking hooks of the connectors.

Installing:

  • Install in reverse order. In the process, note the following:
  • Note colour assignment of contacts.
  • Check connectors are secured properly by pulling.
  • Insert fuel gauge sender -G- into guide on fuel delivery unit and press down until it engages.
  • Install fuel delivery unit → Chapter.
Removing and installing fuel gauge sender -G-, vehicles with front-wheel drive

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.