Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing fuel rail

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

The fuel system is under high pressure.Risk of injury due to fuel which may spurt out.Release high pressure.

→ Chapter

Risk of functional impairment due to soiling → Chapter.

  • Remove intake manifold → Chapter.
  • Remove high-pressure pipe → Chapter.
  • Disconnect electrical connector -1-.
Note

Place a cloth underneath to catch escaping fuel.

  • Remove bolts -arrows- and pull fuel rail off injectors.

Installing

Installation is carried out in the reverse order; note the following:

Note

Renew O-ring.

  • Apply mountings on fuel rail onto injectors.
  • Press fuel rail onto injectors as far as stop (first on right side, then on left side).
  • Press fuel rail down firmly in vicinity of bracket and screw in bolts two turns.
  • Tighten bolts evenly and diagonally.
  • Install high-pressure pipe → Chapter.
  • Install intake manifold → Chapter.

Specified torques

→ Chapter „Assembly overview - fuel rail with injectors“
Removing and installing fuel rail

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.