Volkswagen Golf Quiz
General body repairs, interior

Removing and installing light switch trim

In this manual: General body repairs, interior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1783-
Torque wrench -V.A.G 1783-

Removing

  • Remove rotary light switch -EX1- → Electrical system; Rep. gr.96.
  • Remove bolt -2-.
  • Carefully remove light switch trim -1- towards rear from dash panel.

Installing

Note

Before installing, check all fasteners for damage and renew if necessary.

Installation is carried out in reverse order.

Specified torques

→ Chapter „Assembly overview - dash panel“
Removing and installing light switch trim

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.