Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing oil pressure regulating valve -N428-

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

Note

Fit all heat insulation sleeves in the original position when installing.

  • Remove noise insulation → General body repairs, exterior; Rep. gr.66.
  • Detach heat insulation sleeves.
  • Disconnect electrical connector -1-.
Note

Place a cloth underneath to catch escaping engine oil.

  • Unscrew bolt -2- and pull off valve for oil pressure control -N428-.

Installing

Installation is carried out in the reverse order; note the following:

Note

Renew O-ring.

  • Install noise insulation → General body repairs, exterior; Rep. gr.66.

Specified torques

→ Chapter „Assembly overview - oil filter/oil pressure switch“
Removing and installing oil pressure regulating valve -N428-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.