Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing poly V-belt, vehicles without air conditioner compressor

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Locking pin -T10060 A-

Removing
Removing and installing poly V-belt, vehicles without air conditioner compressor
  • To slacken poly V-belt, turn tensioning device in anti-clockwise direction -arrow-.
  • Lock tensioner in place with locking pin -T10060 A-.
  • If poly V-belt is to be reinstalled, mark direction of rotation on belt using chalk or felt tip pen before removing.
  • Remove poly V-belt.

Installing

Installation is carried out in the reverse order; note the following:
Removing and installing poly V-belt, vehicles without air conditioner compressor
Various versions of the overrunning alternator pulley, -A- or -B-, may be fitted depending on the type and version of alternator.
Removing and installing poly V-belt, vehicles without air conditioner compressor
The length of the poly V-belt must be determined according to the → Electronic Parts Catalogue depending on the version of overrunning alternator pulley.
  • Fit poly V-belt as shown in illustration.
1 - Vibration damper
2 - Tensioner for poly V-belt
3 - Alternator
Removing and installing poly V-belt, vehicles without air conditioner compressor
  • Turn tensioner in -direction of arrow- and pull out locking pin -T10060 A-.
  • Release tensioner.
  • Check that poly V-belt is properly seated.
  • Start engine and check that poly V-belt runs properly.
Removing and installing poly V-belt, vehicles without air conditioner compressor

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.