Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing vibration damper

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Counterhold -T10475-

Removing

  • Remove noise insulation → General body repairs, exterior; Rep. gr.66.
  • Remove poly V-belt → Chapter.
Removing and installing vibration damper
  • Loosen bolt -arrow- for vibration damper using counterhold -T10475-.
  • Unscrew bolt and remove vibration damper.
Risk of damage to engine caused by incorrect valve timing.Do not turn crankshaft out of TDC position.

Installing

Note

Renew bolts that are tightened with specified tightening angle.

All contact surfaces between bolt, vibration damper and crankshaft pulley must be free of oil and grease.
Removing and installing vibration damper
  • Fit vibration damper, oil threads of bolt for vibration damper and screw it in as far as stop by hand.
  • Tighten bolt -arrow- for vibration damper using counterhold -T10475-.
Further installation steps are carried out in the reverse order; note the following:
  • Install poly V-belt → Chapter.

Specified torques

→ Chapter „Assembly overview - poly V-belt drive“
Removing and installing vibration damper

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.