Heating, air conditioning

Removing and installing rear footwell vent

~1min read
Note The illustration shows a left-hand drive vehicle. The removal and installation procedure is identical for both sides.

Removing

  • Remove the sill panel moulding → General body repairs, interior; Rep. gr.70.
  • Remove the front seat → General body repairs, interior; Rep. gr.72.
  • Remove centre console → General body repairs, interior; Rep. gr.68.
  • Lift the floor covering in the area of the vent.
  • Prise off the cable clip -3-.
  • Lift up the rear footwell vent -1--arrows B-, detach from the heater and air conditioning unit -2--arrow A- and take out to the side.
Removing and installing rear footwell vent

Installing

Installation is carried out in the reverse order. When installing, note the following:
  • Check the cable clip -1- for damage before pressing on at the footwell vent -2-.
Note

A loose cable clip or damaged seal can lead to flow noise.

Removing and installing rear footwell vent

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.