Volkswagen Golf Quiz
Electrical system

Removing and installing windscreen washer fluid level sender

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Drip tray

Note Dependent on the equipment level, the windscreen washer fluid level sender -G33- may either be renewed individually or together with the washer fluid reservoir.

Removing

  • Remove front left wheel housing liner → General body repairs, exterior; Rep. gr.66.
  • Place drip tray under washer fluid reservoir.
  • Disconnect electrical connector -2-.
  • Pull windscreen washer fluid level sender -G33--1- out of washer fluid reservoir.
  • If necessary, remove seal -3- from washer fluid reservoir.

Installing

Install in the reverse order of removal, observing the following:

  • Ensure that seal is fitted correctly to opening in washer fluid reservoir.
  • Coat seal with washer fluid so that windscreen washer fluid level sender -G33- can be inserted more easily.
Removing and installing windscreen washer fluid level sender

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.