Running gear, axles, steering
Repairing shock absorber
In this manual: Running gear, axles, steering
~1min read

| 1 - | Shock absorber |
Removing and installing → Chapter
Defective shock absorbers must always be degassed and drained before disposal → ChapterChecking shock absorber following removal → Chapter
| 2 - | Protective tube |
| 3 - | Bump stop |
| 4 - | Shock absorber mounting |
| 5 - | Nut |
Renew after removing
Loosening and tightening → Fig.
25 N·m
| 6 - | Cover |
Special tools and workshop equipment required |
Torque wrench -V.A.G 1331- |
![]() |
Shock absorber set -T10001-Ring spanner insert (commercial type, e.g. »Hazet 6630c-21«) |
![]() |
Loosening and tightening threaded connection for shock absorber mounting
Install in reverse order of removal, observing the following: |
![]() |
Note
The fastener -arrow- of the cable tie -3- must be located within area -a-.Specified torques→ Chapter „Repairing shock absorber“ |
![]() |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?



Note
