Volkswagen Polo Quiz
General Paint Information

Blender

In this manual: General Paint Information
General Paint Information — 128Towing Guide — 10Whels, Tires, Whel Alignment — 126Battery, Starter, Generator, Cruise Control — 65Windshield Wiper/ Washer System — 9Exterior Lights, Switches — 1Interior Lights, Switches — 7Wiring — 51Refrrigerant R134a Servicing — 134
~2min read

Definition:

Blender -LLS MAX 009-

Edition 10/2008

Product Description

The Blender -LLS MAX 009- matches the overlapping areas or the edges from the existing paint to the new paint for proper vehicle spot painting. The raw material base has specific resin and solvent combinations.

Properties:

Application-oriented product-specific aerosol formulation

Constant atomizing pressure

Aerosol distribution

Professional painting result

Ideal for spot repair

Easy, time-saving processing

Especially suitable for touch-up repairs with two layer finishes and two-part one-coat finishes

Exceptional etching ability

Polishes well

Produces seamless edges on touch-up surfaces

Application Instructions

Application

Recommended for:

Spot repairs and touch-ups

Suitable base surfaces:

Immediately apply after spraying the Two-Part Clear Coat -LLS MAX 210- or two-part top coat onto the overlapping areas on the touch-up surface. The base surface in the tapering off/overlapping areas should be sufficiently matted with a sanding pad (P2000-P4000).

Pretreatment:

No special tasks are necessary immediately before apply the blender.

Processing

Note

For work safety, wear appropriate, personal protective equipment:

Breathing mask type: A2/P2

Latex or nitrile protective gloves, for example

Application type “coat”

  • In several spray applications, spray onto the spray mist of either the two-part clear coat or two-part top coat until a uniform transition forms.
  • The two-part clear coat or two-part top coat do not require drying.
Note If the spray application is interrupted, make sure that the valve above the spray head is empty.
Caution

For work safety, wear appropriate, personal protective equipment.

Note the safety data sheets as well as the warnings on the label of the spray nozzle.

Dispose of the empty spray cans as recyclable material.

Characteristics
Blender
Solid content: 4.8 %
Yield: Approximately 0.5 m² / spray can
Gloss level: not applicable
VOC value: 766 g/L, 306 g/can

Storage

The guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 °C.
Blender

Test yourself

A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.