Volkswagen Polo Quiz
General Paint Information

Silicone Remover -LLS MAX 007

In this manual: General Paint Information
General Paint Information — 128Towing Guide — 10Whels, Tires, Whel Alignment — 126Battery, Starter, Generator, Cruise Control — 65Windshield Wiper/ Washer System — 9Exterior Lights, Switches — 1Interior Lights, Switches — 7Wiring — 51Refrrigerant R134a Servicing — 134
~2min read

Definition:

Silicone Remover -LLS MAX 007-

Edition 10/2008

Product Description

The Silicone Remover -LLS MAX 007- is a water-based, reduced-solvent cleaning agent that is rich in active ingredients. The raw material base has specific solvent combinations.

Properties:

Application-oriented product-specific aerosol formulation

Constant atomizing pressure

Aerosol distribution

Highest yield

Professional painting result

Highly effective cleaning- and degreasing agent

Strengthens the adhesion

Highest yield

Even distribution

Application Instructions

Application

Recommended for:

Parts painting and spot repair aid

Best suited for use during the subsequent painting of Aqua Plus water-based paints

Suitable base surfaces:

Primed, filled metal, plastic, glass, old- and factory paint surfaces, painted and unpainted base surfaces
Base Surface Suitability
Primed, filled surfaces +++
Factory and old paint +++
Plastic parts +++
Metal/glass +++

Properties:

Painted surfaces do not become corroded

Removes all types of silicone, an ideal dirt and soot cleaner

Removes cavity sealant or wax

Removes gummy, dried-on grease residue, for example door hinges

Removes oil and grease residue

Ideal solvent for tar marks

Removes adhesive residue, for example stickers

Processing

Note

For work safety, wear appropriate, personal protective equipment:

Breathing mask type: A2/P2

Latex or nitrile protective gloves, for example

Application type “coat”

  • Apply a light coating immediately before applying the subsequent paint layer and right away wipe dry with a clean and dry cloth.
  • Do not allow the silicone remover to evaporate off the surface. Only work on small areas at the same time.
  • Repeat the cleaning procedure if the surface is very dirty.
  • Replace the cloths a few times. Do not use any dirty cloths.
Note If the spray application is interrupted, make sure that the valve above the spray head is empty.
Caution

For work safety, wear appropriate, personal protective equipment.

Note the safety data sheets as well as the warnings on the label of the spray nozzle.

Dispose of the empty spray cans as recyclable material.

Characteristics
Silicone Remover -LLS MAX 007
Solid content: 0 %
Yield: Approximately 0.75 to 1.0 m² / spray can
Gloss level: not applicable
VOC value: 620 g/L, 248 g/can

Storage

The guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 °C.
Silicone Remover -LLS MAX 007

Test yourself

A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.