5-speed manual transmission 0CF

Seals

4steps
~24min
2/5difficulty
Done 0 of 4

Installation Locations Overview - Seals

The transmission illustration does not match the original transmission.

VW UP. 5 Gang-Schaltgetriebe 0CF

  1. Sealing ring
    • for input shaft
    • replace after removal
  2. Sealing ring
    • for right drive shaft
    • replace after removal
  3. Sealing ring
    • for left drive shaft
    • replace after removal
  4. Sealing ring
    • for shift shaft
    • replace after removal

Replacing left seal

Replacing left seal, for left drive shaft

VW UP. 5 Gang-Schaltgetriebe 0CF

Required special tools, testers and equipment, and auxiliary items

  • Multi-purpose tool -VW 771-
  • Extraction hook -VW 771/37-
  • Pressure piece -T10482-
  • Drip tray -VAS 6208-

Removing

- Place drain pan under gearbox.

- Drain transmission oil -arrow-.

- Remove drive shaft → Chassis, Axles, Steering.

VW UP. 5 Gang-Schaltgetriebe 0CF

- Pull out drive shaft seal using -VW 771- and -VW 771/37-.

VW UP. 5 Gang-Schaltgetriebe 0CF

Installing

- Drive in new seal up to stop, making sure the seal does not tilt.

VW UP. 5 Gang-Schaltgetriebe 0CF

- Fill space between sealing lip and dust lip halfway with sealing grease -G 052 128 A1-.

- Install drive shaft → Chassis, Axles, Steering.

- Top up transmission oil.

VW UP. 5 Gang-Schaltgetriebe 0CF

Replacing right seal

Replacing right seal, for right drive shaft

Replacing the right seal is identical to replacing the left seal.