Introduction to the topic
⇒ Preparations for changing a wheel
⇒ Wheel bolts⇒ Raising the vehicle with the jack
⇒ Changing a wheel⇒ After changing a wheel
Some vehicle versions or models are delivered from the factory without a jack and wheel wrench. In this case, have the wheel changed by a specialist workshop.
The factory-supplied jack is designed only for changing a wheel where one tire is damaged and must be replaced. If both tires on one side, both tires on one axle, or all tires are damaged, seek professional assistance.
Change a wheel yourself only if the vehicle is parked safely, you are familiar with the necessary procedures and safety precautions, and suitable tools are available. Otherwise, seek professional assistance!
Additional information and warnings:- Exterior views ⇒ Exterior views
- Tire pressure monitoring system ⇒ Tire pressure monitoring system
- Information on wheels and tires ⇒ Information on wheels and tires
- In an emergency ⇒ In an emergency
- Vehicle tool kit ⇒ Vehicle tool kit
- Wheel covers ⇒ Wheel covers
Changing a wheel can be dangerous, especially when done at the roadside. To reduce the risk of serious injury, observe the following:
- Stop the vehicle as soon as it is possible and safe to do so. Park the vehicle at a safe distance from flowing traffic so that the wheel can be changed.
- All passengers, and especially children, must always stay at a safe distance outside the work area while a wheel is being changed.
- Switch on the hazard warning lights to warn other road users.
- Make sure the ground is level and firm. If necessary, use a large, stable base for the jack.
- Change a wheel yourself only if you are familiar with the necessary procedures. Otherwise, seek professional assistance.
- Always use only suitable, undamaged tools when changing a wheel.
- Always switch off the engine, firmly apply the parking brake, and with the ignition on, move the selector lever to position D or R, or engage a gear in a manual transmission, to reduce the risk of unintended vehicle movement.
- After changing a wheel, have the tightening torque of the wheel bolts checked immediately with a correctly functioning torque wrench.
- After changing a wheel, re-register the tire pressure monitoring system immediately ⇒ Tire pressure monitoring system .
Depending on the model variant, the luggage compartment may contain a loose
box with onboard tool kit. This included onboard tool kit is intended for a possible change of winter tires.
and safety warnings
⇒
Introduction
to the topic