Self Help

Changing a wheel

~2min read
Fig. 155

Changing the wheel: loosen the wheel bolts with the
screwdriver handle.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic Removing the wheel
  • Observe the checklist ⇒ Preparations for changing a wheel .
  • Loosen the wheel bolts ⇒ Wheel bolts .
  • Lift the vehicle ⇒ Lifting the vehicle with the jack .
  • Fully unscrew the loosened wheel bolts using the internal hex in the screwdriver handle ⇒ Fig. 155 and place them on a clean surface.
  • Remove the wheel.
Fitting the spare wheel or temporary spare wheel

If necessary, observe the tire's direction of rotation ⇒ Information on wheels and tires .

  • Fit the spare wheel or temporary spare wheel.
  • Screw in the wheel bolts clockwise and tighten them lightly using the internal hex in the screwdriver handle.
  • For the anti-theft wheel bolt, use the adapter.
  • Lower the vehicle with the jack.
  • Tighten all wheel bolts firmly clockwise with the wheel wrench ⇒. Do not tighten in a circular sequence; instead, always move to a wheel bolt on the opposite side.
  • If necessary, fit the hub caps, center wheel cover or full wheel cover ⇒ Wheel covers .
Warning
Incorrect tightening torque or improperly handled wheel bolts can lead to loss of vehicle control, accidents and serious injury.
  • Keep all wheel bolts and thread engagement surfaces in the wheel hubs clean and free of oil and grease. The wheel bolts must turn smoothly and be tightened to the specified tightening torque.
  • Use the hex socket in the wrench handle only for turning, not for loosening or tightening the wheel bolts.
After changing the wheelRead and observe the introductory information
and safety warnings first
⇒Introduction
to the topic
  • If necessary, clean the tool kit and return it to the foam insert in the luggage compartment ⇒ Tool kit.
  • Secure the spare wheel, temporary-use spare wheel or the replaced wheel in the luggage compartment.
  • Have the wheel bolt tightening torque checked immediately with a torque wrench ⇒ Wheel bolt tightening torque.
  • Have the damaged wheel replaced as soon as possible.

On vehicles with a tire pressure monitoring indicator, the system may need to be reset after
changing the wheel ⇒ Tire pressure monitoring system.